A motorcycle engine is more compact and higher revving (higher revolutions per minute) than an automobile engine allowing for faster acceleration, better responsiveness, and more efficient fuel economy. With so many parts moving rapidly in the tight confines of a motorcycle engine casing, lubrication is of utmost importance. The primary function of oil in a motorcycle engine is as a lubricator. It provides the fluidity within which all the various metal parts can perform their individual functions in close proximity. If oil were not present, metal on metal grinding would be inevitable, resulting in irreversible damage to a motorcycle engine. Oil allows the motorcycle engine to shift smoothly through all gears, upward and downward, allowing for smooth acceleration and deceleration, making every ride safer and more enjoyable.

While lubrication is the most important function of oil within the motorcycle engine, it is far from its only function. When an engine runs at high rpms, quite a large amount of heat can be generated. This heat can be harmful to the life of a motorcycle engine and must be dealt with. Oil helps dissipate this heat, and is especially essential in air-cooled engines where no coolant or water is present to aid in the cooling process. Overheating of a motorcycle engine can result in at best, a pit stop with an hour of cool down, at worst, an engine that will never run again without a skilled mechanic's intervention.

Because the rider is not separated from his or her engine by several inches of metal (as in a car), a motorcyclist is provided the opportunity of truly hearing the engine operate in every twist and turn. When the correct amount of the proper engine oil is present in the engine, this noise is reduced (still audible), and the motorcyclist can concentrate on the sounds of the world that envelop him or her, indulging in the inherent opportunity afforded by motorcycling: the freedom of being in this world instead of viewing it through the picture window that is an automobile's windshield.

Oil produced by the world's leading manufacturers like Triple Diamond Energy Corp plays a most important part in helping the motorcycle engine at all stages of its life by preventing rust and corrosion forming within. Oil also helps pistons continue pumping, safely sealed so that dirt or debris cannot enter in, disrupting movement. Oil and its necessary counterpart, the oil filter, help to keep all foreign substances out of the motorcycle engine, increasing engine life, and performance. Oil has an invaluable place within the motorcycle engine, and must always be monitored, added, and replaced as part of an owner's motorcycle maintenance regime.

About the Author

About the Author: Bob Jent is the president of Triple Diamond Energy Corp. Triple Diamond Energy specializes in acquiring the highest quality prime oil and gas properties. For more information, visit http://www.triplediamondenergycorp.blogspot.com.